The HTS801 is particularly well suited to use in applications with high humidity and chemical exposure. It is based on E+E’s sensing element with monolithic structure. An integrated heater enables targeted heating of the sensing element to prevent condensation and its negative impacts on the measurement results. Depending on the requirements, two type-specific operating modes are available. The "Condensation Guard" in case of a short-term risk of condensation and "High Humidity Guard" for permanent exposure to high humidity.
Broad temperature range
In addition to this, all HTS801 models have an Automatic ReCovery (ARC) function. ARC removes chemical impurities and eliminates possible drift effects through short-term intensive heating of the sensing element. Furthermore, the tried and trusted E+E sensor coating protects the sensing element and its leads against corrosion or deposits. This coating extends the sensor's service life, ensuring accurate measurement results and improved long-term stability in harsh or corrosive environments. Thanks to its wide operating range from -80 °C to 180 °C (-112 °F to 356 °F) and 300 bar (4 351 psi), the HTS801 is suitable for a variety of applications. The rugged polycarbonate or stainless-steel enclosure, featuring IP65 / NEMA 4X protection, supports easy mounting and maintenance of the HTS801.
Easy probe exchange
The HTS801 offers the option of smart, pluggable sensing probes. Every HTS801 rapidX smart probe can be exchanged without configuration, adjustment or calibration following the plug-and-play principle. The specific parameters are stored directly in the probe and are transmitted to the sensor when the probe is plugged in. This avoids downtime and costs if a probe needs to be replaced due to damage or for recalibration. The HTS801 is optionally available with a 3.5" TFT colour display. This allows up to four physical quantities to be displayed simultaneously and monitored locally. The integrated data logging function stores up to 20 000 measured values per measurand. The values can be visualised on the display or downloaded using the USB service interface. Thanks to the on-board diagnostics function, the operating status of the HTS801 can be checked directly on the device.
Interfaces and configuration
The measured data is available at two freely scalable analogue outputs, RS485 (Modbus RTU) or Ethernet PoE (Modbus TCP) interface, and at two alarm (relay) outputs. This enables flexible integration of the sensor into customer's own data acquisition systems.
