High-temperature hose

The CP VITON 459 EL high-temperature hose by Norres Schlauchtechnik meets the requirements of the European ATEX directive and is recommended for transporting combustible bulk materials in accordance with TRBS 2153 (formerly BGR 132), it is highly flexible and compressible 4:1. This suction and blast hose is suited for transporting aggressive solids such as dust, powder and fibres or aggressive gaseous media like vapours and smoke. It has an electrically conductive wall as defined by TRBS 2153. Its electrical and surface resistance are <104Ω and it is suited for temperatures from -20 to 210°C. The high-temperature hose exhibits good resistance to mineral oils, petrol, acids and bases, UV and ozone, and is kink-proof with a small bending radius. The hose features a double-layer wall made of VITON-coated polyester fabric that is clamped in a spiral profile, with an embedded wire to prevent slippage. The outer profile is made of stainless steel (VA) to protect against abrasion. It can be supplied in diameters from 38 to 1000mm. Edited by: Constanze Schmitz