Gravimetric feeder

MechaTron Min by Schenck Process is a solution for feeding very small volumes of powder. This gravimetric feeder has a delivery rate between 100g/h and 10kg/h. Typical applications include laboratory and test facilities for feeding extruders, mixers, mills and granulators. The feeder features a double shaft and vertical agitator. It is designed to allow quick dismantling for cleaning and replacement of the discharge devices. Two different feed hoppers are available to suit different products and delivery rates. The 4l hopper with negative taper has an agitator that works near the base and is suitable for manual filling and small outputs. The 8l hopper is conical and has an agitator that works near the walls and a cover with refill and ventilation necks for larger outputs and automatic refilling. Both versions come with integrated measurement, control and regulation electronics. The drive and weighing technology is contained in a dust-protected housing. A protective housing can be fitted over the entire system to minimise environmental disturbances. Edited by: Constanze Schmitz